Chapter 3 operation – Doric Instruments 5000D Digital Process Indicator and Miniature Datalogger User Manual
Page 13

12
Chapter 3
Operation
Your indicator is programmed by a series of menu driven
displays that are operated by three front panel pushbuttons;
Program-PGM, Arrow-
∆
, and Enter-ENT.
Addressing the main menu items configures the indicator.
The indicator has a program lockout jumper located behind
the front panel lens. Removing the jumper will prevent any
front panel changes of the indicator programming. The
indicator may still be programmed via the computer interface.
When using the Series 5000 Viewer Software the front panel
keyboard is automatically disabled. The basic unit has three
main menu items that define the configuration of the
indicator and one calibration menu.
1. INPT: S
ets up sensor type,
°
F/
°
C, and
1 deg/0.1 degree resolution.
2. MATH:
Selection enables viewing of either
minimum or maximum value.
3
.
CAL:
Used for calibration
.
PGM
ENT
PROGRAM
ARROW
ENTER