Doric Instruments 5000D Digital Process Indicator and Miniature Datalogger - Manual (Page 32)

31
Chapter 5
Doric Series 5000 Viewer Overview
Series 5000 Series indicators interface to PC compatible
computers through the RS232 port. Configuration of RS232
is accomplished simply by selection of COM port. Baud rate
and communications parameters are automatically
configured. All Series 5000 series features (Alarm Status,
Input Identification, Min/Max Indication, Time Tagged
Readings) are presented with a simulated LED display in an
on-screen control panel format.
The internal indicator clock is automatically set to your
computers time and date each time you launch the Series
5000 Viewer Software. The Doric Series 5000 Viewer
enhances the Series 5000 series indicators by adding large
volume data logging capability. Data is logged to formatted
ASCII text files that are compatible with most modern
spreadsheet applications. Data can be logged in increments
from 1 minute to 24 hours.
Minimum PC requirements
486 Processor minimum (Pentium recommended)
Windows 95/NT
16 Mb ram (32 recommended)
Mouse
3.5 inch disk drive
9 or 25 pin Serial Communications Port