Step 4 – Doric Instruments 5000D Digital Process Indicator and Miniature Datalogger User Manual
Page 23
22
Press ENT. The second digit will flash. Enter 0 again with
the ARROW key. Continue on until 0000 is on the display
with the 0 flashing. Press ENT.
STEP 4.
HIGH will appear on the display. Press ENT. Set
the first digit to 2 by using the ARROW button. Set the
second digit to 0 and so on until 2000 is on the display. With
the farthest digit to the right flashing, press ENT. The next
menu item appears.
This manual is related to the following products: