Revision log – Detcon DM-700 User Manual
Page 52
Model DM-700
DM-700 Instruction Manual
Rev. 4.0
Page 48 of 48
10. Revision Log
Revision
Date
Changes made
Approval
2.1
09/24/2008
Previous issue
N/A
2.2
04/26/2010
Adding diagram for installation of 377-XXXX01-YYY (EC
smart sensor in Aluminum housing) to drawings.
Added Revision Log
N/A
3.0
09/07/2010
Updated
drawings
to
reflect
recent
changes
(Aluminum
condulet).
Updated Table 2 to reflect new version of Smart EC sensor cell in
Aluminum housing.
Updated Replacement parts list
Adding Dimensional and Breakaway drawings for 316SS and
Aluminum Condulet to back of manual
N/A
3.1
11/08/2010
Updated Cross Interference table to correct wrong value on
C2H3CL against CO. Old value was 1250=100, corrected value
is 200=100
N/A
3.2
12/08/2010
Changed ATEX certification line under Electrical Classification
in Section 9.1 from “Eex d [ib] ib IIC T6” to “II 2 G Ex d [ib] ib
IIC T4” to match ATEX approval label for DM-700. Moved
Revision Log from Appendix A to new Section 10 and added
Approval column.
B.M.
3.3
04/28/2011
Updated drawings with sensor cell to show new label and
position. Removed Teflon note in Section 2.5.
LU
3.4
07/11/2011
Added inrush current to specifications page
LU
3.5
04/16/2012
Changed cable recommendation, updated the Modbus Register
Map, updated the spare part list
LU
3.6
01/07/2013
Updated ATEX approvals label, updated EN standards that
sensor assembly meets. Updated ATEX listing in Specifications
BM
3.7
06/27/2013
Added information to Operational Guidelines
BM
3.8
11/11/2013
Updated approvals label and other updates
BM
3.9
11/20/13
Corrected Modbus™ Register Table
LU
4.0
12/25/13
Update Calibration to include Wind Guard
BM
Shipping Address: 4055 Technology Forest Blvd., The Woodlands Texas 77381
Mailing Address: P.O. Box 8067, The Woodlands Texas 77387-8067
Phone: 888.367.4286, 281.367.4100 • Fax: 281.292.2860 •
•