AW Gear Meters EMO-500 - Manual (Page 21)

EMO-500
Operation and Programming Manual
20
As mentioned previously, Limits 1 and 2 are preset for ratio alarms, which you can easily adjust for
different ratio settings via Quick Programming.
Adjust Limits 3 and 4
Limits 3 and 4 are used to warn of other monitored parameters such as flow rates or totalized fluid
volumes. Adjust these settings as follows:
Three parts make up the Limit Programming section; do each part in order:
1. Limit 3 Rule and value
2. Limit 4 Rule and value
3. Limit 2 Rule and/or value