Avigilon Gallagher Command Center 7 Integration - Manual (Page 8)

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre
4
Basic Configuration
The basic configuration establishes the link between Avigilon servers and Gallagher
servers. This allows the two servers to communicate.
Adding an Integration User in Avigilon
To protect the security of the Avigilon Control Center Server, add a user to the Avigilon
software specifically for connecting to the integration. See the
Avigilon Control Center Client
User Guide for details about how to add users.
This user must have the following permissions to enable all the integration features:
• View Live Images
o Use PTZ Controls
o Lock PTZ Controls
• View Recorded Images
The integration username and password is used to add Avigilon servers to the Gallagher
Command Centre.
Gallagher DVR Configuration
This configuration allows for communication between the Avigilon server and the
Gallagher server.
1. In the Gallagher Command Centre, open the External Systems Master List
Window.
2. Right-click and select New > DVR System.
The New DVR System—Properties dialog box appears.
3. In the General tab, enter a name for the Avigilon server.
4. In the Configuration tab, enter the server IP address, port, username and
password used to access the Avigilon server. Use the username and password
you created in the
Adding an Integration User in Avigilon procedure.
Use the format ,,