Avigilon Gallagher Command Center 7 Integration - Manual (Page 19)

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre
15
4. Select the Setup tab, and complete the following fields:
o DVR System: select the Avigilon Site you want to receive system
information from.
o Identification: enter one of the following. Make sure the Identification is
spelled exactly as listed or the system events will not be received by the
Gallagher software.
• ACC Server Events - for Avigilon Control Center Server events.
• ACC Database Events - for video indexing, video metadata and configuration
data related events.
• ACC Storage Events - for network video recorder storage events.
5. Click OK.
6. Repeat this procedure until you have a placeholder for each of the three event
types.
Each of the events are mapped to an External Event Group ID in Gallagher. When an
event occurs, the Gallagher Command Centre will respond using the action plan assigned
to the event. To change the action plan, see
Configuring Action Plans for Avigilon Events on
page 15.
Configuring Action Plans for Avigilon Events
Configure an action plan to respond to events generated by the Avigilon system and
cameras.
1. In the External System Master List Window, right-click an Avigilon camera or
placeholder and select Properties.
2. In the DVR Camera—Properties dialog box, select the Event Response tab.