Avigilon Gallagher Command Center 7 Integration - Manual (Page 12)

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre
8
Configuring Gallagher to Trigger and Acknowledge Avigilon
Alarms
Configure the Gallagher Command Centre to manage Avigilon alarms. The Gallagher
Command Centre uses FTCAPI strings to send alarm triggers and acknowledgements to
the Avigilon Control Center.
1. In Gallagher Command Center, open the External Systems Master List Window.
2. Right-click the camera associated with an alarm and select Properties.
3. Select the Trigger-Output tab.
4. Open the Hardware Master List Window.
5. From the Hardware Master List Window, drag the output that will trigger the
alarm into the Trigger—Outputs tab in the Properties dialog box.
Outputs can include magnetic locks, alarm bells, or warning lights. A change in
any of the outputs will send a FTCAPI string that can be used to trigger or
acknowledge an Avigilon alarm.
6. Click OK.
7. In the Hardware Master List Window, right-click the selected output and select
Properties.