Avigilon Gallagher Command Center 7 Integration - Manual (Page 18)

Avigilon Control Center 5 System Integration Guide with Gallagher Command Centre
14
To assign an action plan to an event in Gallagher, see the Gallagher Command Centre
Classic User Guide .
Viewing Recorded Video
Once an alarm is triggered by an event that includes an Avigilon camera action plan,
recorded video can be viewed.
NOTE: If an alarm is deleted, the event cannot be viewed.
1. In the Gallagher Command Center, open the Alarm Viewer.
2. Right-click the alarm, then select View and select the camera.
If the video does not display, the event may still be occurring and the Avigilon server has
not finished recording the event. Wait a few seconds then try again, or watch the live
video.
If you cannot locate the alarm, use the Find Tool to locate the recorded video.
Configuring Avigilon System Events in Gallagher
To monitor Avigilon system events in Gallagher, you must create three placeholder
cameras to receive event information from Avigilon. This allows you to monitor the health
of the Avigilon Control Center system in the Gallagher Command Centre. Avigilon system
events can include server errors, database issues and low storage availability.
1. In the Gallagher Command Centre, open the External Systems Master List
Window.
2. Right-click the window and select New > DVR System Camera.
3. In the General tab, give the placeholder a name.