beautypg.com

Aquametrix P/R60C-6 Differential pH/ORP Probes User Manual

Page 2

background image

Model P60C-6 pH or R60C-6 ORP Differential Probes

www.WaterAnalytics.net

978-749-9949 Toll free - 855-747-7623 (855-pHProbe)

Technical Data

Related Products

Measuring Range

pH

0 to 14 pH

(Consult factory for applications below 2 or

above 12).

ORP

-1000 to +1000 mV

Flow Rate

10 ft./sec maximum (3 metres/sec)

Flow should be as low as possible in low

conductivity water and in solutions with

high suspended solids

Wetted Materials

CPVC, kynar, glass, titanium palladium al-

loy and EPDM (platinum for ORP probe)

Transmission Distance

3000 ft. (900 m)

Sensitivity

pH

0.01 pH

ORP

0.1 mV

Stability

pH

0.03 pH per day, non-cumulative

ORP

2 mV per day, non-cumulative

Temperature Copensation

Automatic

-5 to 95°C (23 to 203°F)

Pressure Limit

100 psig at 65°C maximum

Temperature Limits

CPVC

-5 to 95°C (23 to 203°F)

The temperature limit of probes in flow-

through applications is limited by pressure

and by the pipe fitting material.

Probe Cable

5 Conductor plus shield, 15 ft. (4.6m) long

CABLES & ACCESORIES

JB-1

NEMA 4X junction box

STC60-6

Mounting kit for submersion applications includes 1-1/4” NPT x 1” reducer, 4

feet of 1” CPVC pipe with water-tight strain relief fitting and securing assembly

P60HTC

Hot Tap Ball Valve assembly (Probe not included)

C42-5PXXX

Interconnect cable, dressed both ends. Specify length.

C35-17

Salt bridge Kit for all -6 series probes, package of 3.

C35-79

Compression fitting for all -6 series probes.

C34-51

Adapter for GLI Installations.

Protector-6

Protection shroud for submersion applications.

CALIBRATION SOLUTIONS

A35-13

pH 4 Buffer, 500 mL.

A35-14

pH 7 Buffer, 500 mL

A35-24

pH 10 Buffer, 500 mL

A35-40

ORP Buffer, 200 mV, 500 mL

A35-41

ORP Buffer, 600 mV, 500 mL

Ordering Information

P60C-6

pH probe complete with universal installation

fitting for flow-through or submersion applica-

tions

P60C-7

pH Probe for use with Hot-Tap hardware

P60C-6F

Flat-face pH probe

R60C-6

ORP probe complete with installation fitting

for low-through or submersion applications

R60C-6-G

ORP probe with gold electrode

R60C-7

ORP Probe for use with Hot-Tap hardware

Dimensions

18.1 (460)

14.0 (356)

1.125 (28.6)

1.00 (25.4)

9.25 (235)

5.08 (129)

1.125 (29)

1.00 (25.4)

P60C6

P60C7

This manual is related to the following products: