Aposonic A-H2A8D2 - Manual (Page 33)

- 33 -
5.5 Backup Device
In Menu display, press ▲▼◄► to change the highlighted option to Backup Device,
and then press
ENTER to call up Backup Device display as shown below.
The system supports
internal DVD for Internal DVD models and a variety of USB
2.0 storage devices, including Storage Disk such as USB 2.0 storage disk drives and
DVD Disc (including DVD+RW, DVD+R, and DVD-R) . (DVD-RW is not
supported.) The operations are as below:
▲▼◄►
Press these buttons to select the items.
ESC (Mouse: Right Click)
Press this button to escape from this screen, and return to previous display.
MODE
Eject the tray and disconnect. (for Internal DVD only)
SEQ
Load the tray and connect. (for Internal DVD only)
Connect/Disconnect – If the specific backup device is disconnected (as shown in
Current Status), please plug the USB device in one of the USB ports of the system
and/or insert a DVD for DVD device, and then press
ENTER (Mouse: Left
click) to command the system to connect with the device. If the specific device
is already connected (EX. Read/write, as shown in Current Status), please press
ENTER (Mouse: Left click) to command the system software to disconnect
with the device, and then unplug the backup device from the backup port.
Note 1:
Please DO NOT format the DVD disc for better performance and
compatibility.
Note 2: Before using USB pen drive, please format it to FAT32 file system by
MS-Windows.