Aposonic A-H2A8D2 - Manual (Page 19)

- 19 -
RS-485 keyboard or Terminal
Connect the RS-485 connector to a RS-485 keyboard controller or VT-100
terminal via the appropriate cables. Please make sure to setup the RS-422/485
configurations as described in
Section 6.9 accordingly. Please refer to
Appendix C for the Keyboard Control Protocol for the digital video recorder.
eSATA Hard Disk
Connect the eSATA connector to an eSATA hard disk for HDD extension.
GPS modem
Connect the RS-232 connector to GPS modem via the appropriate cable. The
system supports the GPS modems with
NMEA0183 protocol. Please make sure
to setup the RS-232 port ( Section 6.9 ) accordingly.