Star Water Systems SJ10 - Manual (Page 12)

12
95 North Oak Street • Kendallville, IN 46755 • © 2014 Star Water Systems. All rights reserved.
1 in. PVC elbow
1-1/4 in.
PVC elbow
1-1/4 in. pipe 1 in. pipe
2 in.
9. Cut the 1 in. pipe 2 in. shorter than the 1-1/4
in. pipe. Smooth rough edges. Using a two
step PVC system, attach a 1 in. PVC elbow
(not included) and a 1-1/4 in. PVC elbow (not
included) to the pipes extending from the well
seal. Both elbows should face the pump.
10. Using a two step PVC system, attach
enough rigid 1 in. and 1-1/4 in. PVC pipe and
couplings to connect the pump to the 1 in.
and 1-1/4 in. elbows.
NOTE: Ensure the pipe slopes slightly toward the
well to prevent air pockets in the pipe.
Proceed to pUMp TO TANk CONNeCTiON
10
1 in. PVC pipe
1-1/4 in.
PVC pipe
1-1/4 in.
Elbow
1 in.
Elbow
9
Well TO pUMp CONNeCTiON (SUCTiON pipe)