Spectra Precision Survey Pro v3.80 Recon GPS User Manual - Manual (Page 79)

75
Tutorial Jobs
This section contains sample jobs to illustrate all of the main
functions of Survey Pro GPS Module. Each job illustrates different
horizontal and vertical projection methods as well as different GPS
field procedures.
Before Starting
•
Make sure you have the file demofile.txt in the same directory as
the Survey Pro executable (usually in Disk\Program
Files\Survey Pro).
•
Make sure you have the files TDSControl_Ground.job and
TDSControl_ORNorth.job loaded on the machine (usually in
Disk\SurveyPro Jobs)
•
Make sure you have the geoid files Oregon G99.ggf and North
America EGM96.ggf in the \Disk\Geodata directory.
•
Make sure the Standard and GPS modules are registered.
•
Make sure you are in GPS Mode. If the instrument/receiver icon
on the title bar shows a total station, tap the icon and switch to
GPS Mode.
•
Make sure the Brand on the Receiver card is set to Manual Mode
and the Model is set to Demo Mode .
Existing Job: Ground – TDS Localization
Objectives
This tutorial job will teach you:
•
How to generate local coordinates in an existing ground level
coordinate system using new GPS measurements.
•
How to set the RTK base and rover.
•
How to occupy control points and solve a TDS Localization
adjustment.
•
How to move the base station receiver to both measured and
existing plane points.