Spectra Precision SP80 - Manual (Page 39)

Engl
ish
33
Log button to mark the beginning of the occupation.
This takes you back to the General Status screen as
well.
To stop an occupation:
• From the General Status screen, press the Log button. The
following screen is then displayed.
• Press the Log button. This takes you back to the General
Status screen. Note that raw data recording is still in
progress.
To start a new occupation (raw data recording still in
progress):
• From the General Status screen, press the Log button
twice.
To stop data recording:
• From the General Status screen, press the Log button.
• Whether an occupation is in progress or not, just press the
Scroll button.
The following screen is then displayed:
• Press the Log button. Data recording stops right away and
the receiver comes back to the General Status screen. If
an occupation is in progress, the end of data recording will
also be the end of the occupation.