6 winging the 7-plex machine down, Winging the 7-plex machine down – Seed Hawk TOOLBAR 2012 User Manual
Page 33

Seed Hawk Manual
Tool Bar
Page 26
4.6 WINGING THE 7-PLEX MACHINE DOWN
 
NOTE: Please ensure your dump line is coupled first. If your control box 
has a 7- plex wing down button please use the following 2 steps to lower 
your wings safely. Ensure control box is powered up with 12v. 
 
1. Engage the lever in the tractor cab that your green banded hoses are hooked to (which
lowers your main wings), press and hold the 7-plex wing down switch until all wings are on 
the ground. 
2. Release switch and leave your lever (that your green banded hoses are hooked to) in
working position (not float).
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Ensure the Dump line gauge never exceeds 
100 PSI. Excessive amounts of pressure will 
damage the gauge. 
Yellow banded Dump line hose must be 
connected to the circuit which is plumbed 
directly to the tractor reservoir. 
1
