LumaSense Technologies IGA 740-LO - Manual (Page 5)

1
1 Basic Information
1.1 Notes for the User Manual
This user manual describes the structure of the KLEIBER 740-LO infrared pyrometer for
non-contact temperature measurement and gives the operators all the necessary infor-
mation related to installation, operation, de-installation along with information related to
maintenance and repairs of the pyrometer. When malfunctions occur, the user manual
provides suggestions for their potential causes and their repair.
propriate technical expertise including a basic knowledge of temperature measuring
technology.
Before you use the pyrometer for temperature measurement, you must have read and
understood these operating instructions! Keep the manual so that it is available at all
times.
Take into account all the requirements given in this user manual. This is a pre-condition
for:
regulations.
Document structure and Symbols
Operating instructions to be performed in sequence are numbered in chronological
order. They are grouped together in operational units and accompanied by the cor-
responding results.
Listings without a sequential order are presented as bullet points and items in sub-lists
are preceded by dashes.
Safety precautions are shown with pictograms and key words. They provide informa-
tion about the type, source and consequences of the hazard, and safety precautions.
The meanings of the pictograms and key words are explained in the
„Safety Instructions“ chapter.
1.2 Purpose
contact measurement of surface temperatures on metal, ceramic, plastics and is spe-
cially designed for industrial applications as well as applications in the area of research
and development.
The 730-LO also enables you to solve high speed applications in laser areas by using