LumaSense Technologies IGA 740-LO - Manual (Page 27)

23
11 Taking out of service, Disposal
11.1 Taking out of service
DANGER
Removing electrically live cables risks injury and damage to equipment.
Never remove electrically live connecting cables. Before removing a
cable, ensure that the power supply has been switched off.
Take the pyrometer out of operation as follows:
1. Switch off the power supply to the pyrometer.
2. Remove the cables at the rear side of the pyrometer.
3. Remove the connections of the cooling system and empty the remaining
cooling water from the cooling ducts of the pyrometer.
4. Dismantle the pyrometer from the mounting plate.
5. If necessary bring the optics in and tighten the annular nut.
The pyrometer is thus out of operation.
11.2 Disposal
For disposal, you can return the pyrometer to KLEIBER Infrared GmbH
(for address see page 23). For this you should pack the pyrometer
appropriately in the original packaging or use a cardboard carton with shock
absorbing PE material.
REFERENCE TO ENVIRONMENTAL PROTECTION
Do not dispose of the pyrometer with domestic refuse!