LumaSense Technologies IGA 740-LO - Manual (Page 11)

7
3.2 General Safety Notes
The KLEIBER 740-LO pyrometer has been built in accordance with the currently
valid standards of the technology and the recognized safety regulations and en-
sures the highest safety level.
The fundamental safety and occupational safety requirements of applicable laws,
standards, and guidelines have been taken into account in the pyrometer design.
CE mark.
All information related to safety is with reference to the regulations of the Europe-
an Union currently in force. In other countries, applicable laws, national directives
and safety regulations have to be met.
Apart from the safety instructions given in these operating instructions, you should
also take into account the generally valid regulations for accident prevention and
environmental protection as well as the regulations of the respective professional
associations and strictly comply with them.
Note the general safety instructions:
commissioning (see section 6).
of the pyrometer. Other cables, especially cables manufactured by your
self, are not permitted
are not clamped or squashed.
components of the pyrometer (housing, optics, cable and pipes). Never
operate the pyrometer with damaged components.