LT Security IPPTZ762 - Manual (Page 80)

User Manual of IR Network Speed Dome 79
7. Click to save the settings.
Figure 6-49 Alarm Output Settings
6.6.22 Handling Exception
The exception type can be HDD full, HDD error, network disconnected, IP address
conflicted and illegal login to the speed domes.
Steps:
1. Enter the Exception Settings interface:
Configuration > Advanced Configuration> Events > Exception
2. Check the checkbox to set the actions taken for the Exception alarm. Refer to
Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1
Configuring Motion Detection.