LT Security IPPTZ762 - Manual (Page 53)

User Manual of IR Network Speed Dome 52
, ) to enable the feature.
3. Configure the SNMP settings.
The configuration of the SNMP software should be the same as the settings you
configure here.
4. Click to save and finish the settings.
6.3.6 Configuring 802.1X Settings
Purpose:
The speed dome supports IEEE 802.1X standard.
IEEE 802.1X is a port-based network access control. It enhances the security level of
the LAN. When devices connect to this network with IEEE 802.1X standard, the
authentication is needed. If the authentication fails, the devices don’t connect to the
network.
The protected LAN with 802.1X standard is shown as follows:
Network Switch
PC
PC RADIUS
Server
Network Dome
Net
Figure 6-17 Protected LAN
 Before connecting the Network Camera to the protected LAN, please apply a
digital certificate from a Certificate Authority.
 The network
camera requests access to the protected LAN via the
authenticator (a
switch).
 The switch
forwards
the identity and password to the
authentication
Authenticator
Authentication
Server