Onfiguring, Etwork, Ettings – LT Security IPPTZ762 User Manual

Page 45: Configuring tcp/ip settings, 3 configuring network settings, 1 configuring tcp/ip settings

Text mode
Original mode

User Manual of IR Network Speed Dome

Steps:

(1) Enter the DST interface by Configuration > Advanced Configuration >
System > DST

(2) Check

to enable the DST function.

(3) Set the date of the DST period.

(4) Click

to save the settings.

Figure 6-6 DST Settings

6.3 Configuring Network Settings

6.3.1 Configuring TCP/IP Settings

Purpose:
TCP/IP settings must be properly configured before you operate the speed dome over
network. IPv4 and IPv6 are both supported.
Steps:
1. Enter TCP/IP Settings interface:

Configuration > Basic Configuration > Network > TCP/IP
Or Configuration > Advanced Configuration > Network > TCP/IP

This manual is related to the following products:

IPPTZ752