LT Security IPPTZ762 User Manual
Page 46

User Manual of IR Network Speed Dome
45
Figure 6-7 TCP/IP Settings
2. Configure the NIC settings, including the IPv4(IPv6) Address, IPv4(IPv6) Subnet
Mask and IPv4(IPv6) Default Gateway.
3. Click
to save the above settings
.
If the DHCP server is available, you can check
to automatically obtain an IP
address and other network settings from that server.
The valid value range of Maximum Transmission Unit(MTU) is 500 ~ 9676. The default
value is 1500.
The Multicast sends a stream to the multicast group address and allows multiple clients
to acquire the stream at the same time by requesting a copy from the multicast group
address.
Before utilizing this function, you have to enable the Multicast function of your router
and configure the gateway of the network speed dome.
If the DNS server settings are required for some applications (e.g., sending email), you
should properly configure the Preferred DNS Server and Alternate DNS server.
Figure 6-8 DNS Server Settings