LT Security IPPTZ762 - Manual (Page 69)

User Manual of IR Network Speed Dome 68
De-fog Mode
When there is fog in the image, you can enable this function to get clear image.
Zoom Limit
You can set Zoom Limit value to limit the maximum value of zooming. The value can
be set to 20, 40, 80, 160 and 320.
This function varies depending on the models of speed dome.
Chroma Suppress
The Chroma Suppress level ranges from 0 to 100 as shown in Figure 6-37.
Figure 6-37 Chroma Suppress
This function varies depending on the models of speed dome.
HLC
HLC (High Light Compensation) makes the camera identify and suppress the strong
light sources that usually flare across a scene. This makes it possible to see the detail
of the image that would normally be hidden.
Local Output
You can select the output mode to ON or OFF.
6.5.15 Configuring OSD Settings
Purpose:
The speed dome supports following on screen displays:
Zoom: Identifies the amount of magnification.
Direction: Displays panning and tilting direction, with the format of PXXX TXXX. The
XXX following P indicates the degrees in pan direction, while the XXX following T
indicates the degrees in tilt position.
Time: Supports for time display.
Preset Title: Identifies preset being called.
Camera Name: Identifies the name of speed dome.
You can customize the on screen display of time.