Onfiguring, Ideo and, Udio – LT Security IPPTZ762 User Manual
Page 60: Ettings, Configuring video settings, 4 configuring video and audio settings, 11 configuring video settings
User Manual of IR High-Definition Network Speed Dome
59
6.4 Configuring Video and Audio Settings
6.4.11 Configuring Video Settings
Steps:
1. Enter the Video Settings interface:
Configuration >Basic Configuration > Video / Audio > Video
Or Configuration > Advanced Configuration > Video / Audio > Video
Figure 6-25 Configure Video Settings
2. Select the Stream Type of the speed dome to main stream (normal), sub-stream
or third stream.
The main stream is usually for recording and live viewing with good bandwidth,
and the sub-stream can be used for live viewing when the bandwidth is limited.
Refer to the Section 6.1 Configuring Local Parameters for switching the main
stream and sub-stream for live viewing.
3. You can customize the following parameters for the selected main stream,
sub-stream or third stream:
Video Type:
Select the stream type to video stream, or video & audio composite stream. The
audio signal will be recorded only when the Video Type is Video & Audio.
Resolution:
Select the resolution of the video output.
Bitrate Type:
Select the bitrate type to constant or variable.