LT Security IPPTZ762 - Manual (Page 27)

User Manual of IR Network Speed Dome 26
39 IR cut filter in 99 Start auto scan
40 IR cut filter out 100 Start tilt scan
41 Call pattern 1 101 Start panorama scan
42 Call pattern 2 102 Call patrol 5
43 Call pattern 3 103 Call patrol 6
44 Call pattern 4 104 Call patrol 7
92 Start to set limit stops 105 Call patrol 8
You may need to use the OSD(On Screen Display) menu when controlling the speed
dome remotely. To display the OSD menu on the live view screen, you can call the preset
number 95.
4.5.3 Setting / Calling a Patrol
Purpose:
A patrol is a memorized series of preset function. It can be configured and called on
the patrol settings interface. There are up to 8 patrols for customizing. A patrol can
be configured with 32 presets.
Before you start:
Please make sure that the presets you want to add into a patrol have been defined.
 Setting a Patrol:
Steps:
1. In the PTZ control panel, click to enter the patrol settings interface.
2. Select a patrol number from .
3. Click to enter the adding interface of preset as shown in Figure 4-7.
Figure 4-7 Adding Presets