Hired-Hand System 1000 Power Curtain - Manual (Page 6)

System 1000 Power Curtain Features
••
3
Features
Every grower has different needs, thus the Controller has many
features which can be omitted or included at will to align the system to
your individual needs. This section will cover the various features,
including a brief description, and in most cases give an example to show
the flexibility and ease of setup of this controller.
Ramping
Ramping is a special feature that allows for gradual temperature
reduction during a growout. This feature reduces temperature daily (at
midnight) to provide a slow gradual temperature decrease within the
confinement building. When starting a growout, use the Target Temp
arrows to select your starting temperature. The controller will prompt
you for the following information when ramping is selected. "Number
of days" and "Ending temperature"
If at any time during the period when ramping is active, you feel
that the Temperature is too high, or too low, simply use the target
temperature up or down arrows to adjust the current Target Temp. The
controller will automatically re-calculate the proper target temperature
reduction per day needed to reach the ending temperature on the
selected day.
Setup System
Sensors for display
The Sensors for display feature lets you choose which sensor’s reading
will show up on the screen during normal operation. You may select
any combination of sensors one, two, and three. (Sensor four is for
outside sensor control).