Hired-Hand System 1000 Power Curtain - Manual (Page 12)

System 1000 Power Curtain Operation With Levels
••
9
Operation With Levels
Save Level
The System can save up to four programs. This feature lets you program
for different periods in a growout when different environmental
conditions may be needed. Push the Select Feature up arrow key until
"Save Level" is displayed in the window. Use the Change Setting up
arrow key to select "yes", next, push the Select Feature up arrow key.
Level Menu, and Level Number will be displayed. Use the Change
Setting arrow key to select the level number you would like to save.
Push the Select Feature up arrow key which will display "This erases
old level number, Continue Yes or No". Push the Change Setting up
arrow key to select "yes", then The System will display the level number
being saved. The features saved by the system are as follows: Target
Temp, and the Outside Sensor Control. The System will not save
information regarding the mode of operation (Manual or Automatic).
Restore Level:
The System can restore up to four different levels. Push the Select
Feature up arrow key until Restore Level is displayed in the window.
Push the Change Setting up arrow key to select "yes". Push the Select
Feature up arrow key and Level Menu, Level Number will be displayed.
Use the Change Setting arrow key to select the Level Number you
would like to restore. Push the Select Feature up arrow key and This
Changes The Setup, Continue Yes or No will be displayed. Use the
Change Setting up arrow key to answer yes. Now, push the Select
Feature up arrow key and "Restoring Level (Number)" will be
displayed.