Cpu upgrade – Elitegroup G736 User Manual
Page 101
7.
To install the new HDD, you will need to align the tabs on the drive bracket with the
slots on the bay. Press down gently on the drive bracket until it engages with the
system. Do not force the drive into place this can bend the pins on the hard drive.
8.
Slide the compartment cover into place and be sure the screw holes on the cover align
completely with the screw holes in the case.
9.
Secure the cover with the screws.
CPU Upgrade
To upgrade your CPU, follow the procedures below:
1.
Turn the notebook over so that the rear ports are facing you.
2.
Locate for the expansion compartment.
3.
Unscrew and remove the cover of the CPU compartment.
4.
Remove all the screws attached to the heatsink.
Before removing the screws, there are certain measures to followed in removing the heatsink
99
- MB50II / IA ID 1 (72 pages)
- MB40II ID 9 (73 pages)
- MB40II / IA ID 8 (73 pages)
- MB40II ID 7 (71 pages)
- MB40II ID 6 (57 pages)
- MB40II ID 5 (56 pages)
- MB40II ID 4 (53 pages)
- MB40II / IA ID 3 (73 pages)
- MB40II / IA - 41II ID 2 (72 pages)
- MB40II ID 1 (73 pages)
- L41II (69 pages)
- U40-50SA (70 pages)
- U41II (65 pages)
- U10IL (84 pages)
- A900 (V2.1) (85 pages)
- A535 (117 pages)
- A531_TM5800 (110 pages)
- 755SI4 v.1 (22 pages)
- 755SI4 v.2 (17 pages)
- 755SI4 v.3 (6 pages)
- 755SI4 v.4 (7 pages)
- 755SI4 v.5 (8 pages)
- 755IN v.1 (22 pages)
- 755IN v.2 (10 pages)
- 755IN v.3 (14 pages)
- 755IN v.4 (10 pages)
- 755IN v.5 (17 pages)
- 755IN v.6 (6 pages)
- 755IN v.7 (7 pages)
- 755IN v.8 (9 pages)
- 755II1 v.1 (22 pages)
- 755II1 v.2 (10 pages)
- 755II1 v.3 (14 pages)
- 755II1 v.4 (10 pages)
- 755II1 v.5 (17 pages)
- 755II1 v.6 (6 pages)
- 755II1 v.7 (7 pages)
- 755II1 v.8 (9 pages)
- 557 (81 pages)
- 536 (71 pages)
- 532 (83 pages)
- 332 (73 pages)
- 331 (77 pages)
- 331 (75 pages)
- 330 (73 pages)