Product overview, Hardware features – Brocade FCX Series Hardware Installation Guide User Manual
Page 13
Product Overview
Hardware features
The following hardware platforms are supported by this release of this guide:
•
The Brocade FCX 624S stackable switch has twenty 10/100/1000 Mbps ports plus four Combo
ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps SFP ports. The
switch has two management interfaces, a DB9 serial port (Console) on the front panel and an RJ45
port (Out-of-band Management Interface) on the rear panel. Two rear-panel power supply
receptacles allow for up to two power supply units. Two dedicated 16 GbE CX4 ports on the rear
panel allow stacking for up to eight units. The front panel also has a module slot for an optional
two-port 10 Gbps XFP module.
•
The Brocade FCX 648S stackable switch has forty four 10/100/1000 Mbps RJ45 ports plus four
Combo ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps SFP
ports. The switch has two management interfaces, a DB9 serial port (Console) on the front panel
and an RJ45 port (Out-of-band Management Interface) on the rear panel. Two rear-panel power
supply receptacles allow for up to two power supply units. Two dedicated 16 Gbps Ethernet CX4
ports on the rear panel allow stacking for up to eight units. The front panel also has a module slot
for an optional two-port 10 Gbps Ethernet XFP module.
•
The Brocade FCX 624S-F stackable switch has two management interfaces, a DB9 serial port
(Console) on the front panel and an RJ45 port (Out-of-band Management Interface) on the rear
panel. Two rear-panel power supply receptacles allow for up to two power supply units. Two
dedicated 16 Gbps Ethernet CX4 ports on the rear panel allow stacking for up to eight units. The
front panel also has a module slot for an optional two-port 10 Gbps Ethernet XFP module.
•
The Brocade FCX 624S-HPOE stackable switch has twenty 100/1000 Mbps ports plus four Combo
ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps SFP ports. The
switch has two management interfaces, a DB9 serial port (Console) on the front panel and an RJ45
port (Out-of-band Management Interface) on the rear panel. Two rear-panel power supply
receptacles allow for up to two power supply units. Two dedicated 16 Gbps Ethernet CX4 ports on
the rear panel allow stacking for up to eight units. The front panel also has a module slot for an
optional two-port 10 Gbps Ethernet XFP module.
•
The Brocade FCX 648S-HPOE has is a stackable switch with forty four 10/100/1000 Mbps ports
plus four Combo ports, which include four 10/100/1000 Mbps RJ45 ports and four 100/1000 Mbps
SFP ports. The switch has two management interfaces, a DB9 serial port (Console) on the front
panel and an RJ45 port (Out-of-band Management Interface) on the rear panel. Two rear-panel
power supply receptacles allow for up to two power supply units. Two dedicated 16 Gbps Ethernet
CX4 ports on the rear panel allow stacking for up to eight units. The front panel also has a module
slot for an optional two-port 10 Gbps Ethernet XFP module.
•
The Brocade FCX 624-E switch has twenty four 10/100/1000 Mbps ports. The device has two
management interfaces on the front panel, a DB9 serial port (Console) and an RJ45 port (Out-of-
band Management Interface). The front panel has a slot for an optional four-port 1GbE SFP module
(works as Combo port) or four-port 10 Gbps SFP+ module. On the rear panel a removable fan tray
provides a cooling airflow from the front to the rear of the device. Two rear-panel power supply
receptacles accommodate up to two power supply units that also support a front-to-rear cooling
airflow.
Brocade FCX Series Hardware Installation Guide
11
53-1003077-01