Brocade FastIron Ethernet Switch Software Licensing Guide - Manual (Page 42)

STP configured to ON, priority is level0, mac-learning is enabled
Flow Control is enabled
Mirror disabled, Monitor disabled
Member of active trunk ports 1/2/1,1/2/2,1/2/3,1/2/4, primary port
Member of configured trunk ports 1/2/1,1/2/2,1/2/3,1/2/4, primary port
No port name
Ports on Demand licensing on the ICX 6650
.
The Brocade ICX 6650 device features Ports on Demand licensing. With Ports on Demand licensing,
software features do not require licenses and you can add port licenses as needed. The Brocade ICX
6650 device supports:
• 56 front-panel, dual-speed 1/10 GbE SFP+ ports
• 4 rear-panel 40 GbE QSFP+ ports
• 2 rear-panel 4x10 GbE QSFP+ breakout ports
The details for obtaining a license is provided in the "Obtaining a license" section of the "Software
Licensing Overview" chapter.
NOTE
There is no trial license available for the PoD feature for the ICX 6650 device.
Front Panel PoD
The front panel has the following fixed PoD ports:
• Ports 1/1/1 to 1/1/32 are enabled by default.
• Ports 1/1/33 to 1/1/56 are disabled by default and are in an error-disabled state.
For a detailed description of the port states (up, down, or error-disabled), refer to the Configuration
considerations when configuring PoD for Brocade ICX 6650 devices section. The following is an
illustration of the front panel ports.
FIGURE 7 Brocade ICX 6650 front panel ports
Rear Panel Flexible Ports on Demand
The rear panel has 6 QSFP+ ports:
Ports on Demand licensing on the ICX 6650
40 FastIron Ethernet Switch Software Licensing Guide
53-1003091-02