Devices – Brocade FastIron Ethernet Switch Software Licensing Guide User Manual

Page 37

If ports 2 and 4 are configured to 1 Gbps port speed, the license state changes to the default. The
following output from the show pod command displays port 2 and 4 in the default state.

Brocade#show pod

Unit-Id: 1

PoD-ports Lic-Available Lic-Used

1/2/2 No No

1/2/4 No No

Syntax: show pod [unit id]

The unit id parameter specifies the unit ID number of the PoD you want to display.

For a description of the fields in the show pod command output, refer to

Displaying license

configuration for PoD ports for ICX 6610 devices

on page 34.

Displaying license configuration for PoD ports for ICX 6650 devices

To display the license configuration for PoD ports in the system, enter the show pod command at the
CLI level. In the following output, the 16-port capacity license is used for the 10 GbE PoD license, and
the 6-port capacity license is used for the 40 GbE PoD license.

Brocade#show pod

Unit-Id: 1

PoD 10G license capacity: 16

PoD 10G license capacity used: 16

PoD 40G license capacity: 6

PoD 40G license capacity used: 6

PoD-ports Lic-Available Lic-Used

1/1/33 Yes Yes

1/1/34 Yes Yes

1/1/35 Yes Yes

1/1/36 Yes Yes

1/1/37 Yes Yes

1/1/38 Yes Yes

1/1/39 Yes Yes

1/1/40 Yes Yes

1/1/41 Yes Yes

1/1/42 Yes Yes

1/1/43 Yes Yes

1/1/44 Yes Yes

1/1/45 Yes Yes

1/1/46 Yes Yes

1/1/47 Yes Yes

1/1/48 Yes Yes

1/1/49 No No

1/1/50 No No

1/1/51 No No

1/1/52 No No

1/1/53 No No

1/1/54 No No

1/1/55 No No

1/1/56 No No

1/2/1 Yes Yes

1/2/2 Yes Yes

1/2/3 Yes Yes

1/2/4 Yes Yes

1/3/1 Yes Yes

1/3/2 Yes Yes

1/3/3 Yes Yes

1/3/4 Yes Yes

1/3/5 Yes Yes

1/3/6 Yes Yes

1/3/7 Yes Yes

1/3/8 Yes Yes

Syntax: show pod

The following table describes the information displayed in the output of the show pod command.

Displaying license configuration for PoD ports for ICX 6650 devices

FastIron Ethernet Switch Software Licensing Guide

53-1003091-02