Recipients option, Trap receivers, User’s guide – APC Battery Management System User Manual

Page 90: Battery management system

USER’S GUIDE

Battery Management System

Recipients Option

Trap Receivers

You can define up to four NMSs to be used as trap receivers when an event
occurs that has SNMP traps enabled.

In the Web interface, use the

Trap Receiver

settings, available through the

Recipients

option of the

Events

menu.

In the control console, use the

SNMP

option of the

Network

menu.

Item

Definition

Community Name

The password (15 characters or less) used when traps are sent
to the NMS identified by the

Receiver NMS IP/Domain Name

setting.

Receiver NMS IP/
Domain Name

The IP address or domain name of the NMS to which traps are
sent. If this setting is

0.0.0.0

(the default), no traps are sent to

any NMS.

Generation (Web
interface)
Trap Generation
(control console)

Enables (by default) or disables the sending of any traps to the
NMS identified by the

Receiver NMS IP/Domain Name

setting.

Authentication Traps

Enables or disables the sending of authentication traps to the
NMS identified by the

Receiver NMS IP/Domain Name

setting.