APC Battery Management System - Manual (Page 74)

®
USER’S GUIDE
Battery Management System
67
Identification
Use this option to define the System Name , Location , and Contact values
used by the SNMP agent for the management card that is built into the
master controller of the Battery Management System. The values defined
here are used for the MIB-II
sysName , sysContact , and sysLocation
Object Identifications (OIDs).
Date & Time
Use this option to set the time and date used by the Battery Management
System. The option displays the current settings, and allows you to change
those settings manually, or through a Network Time Protocol (NTP) Server.
Set Manually.
Use this option in the Web interface, or Manual in the
control console, to define the date and time for the Battery Management
System.
Synchronize with Network Time Protocol (NTP) Server. Use this option,
or Network Time Protocol (NTP) in the control console, to have an NTP
Server update the date and time for the Battery Management System
automatically.
For more information about the MIB-II OIDs, see the
PowerNet
®
SNMP Management Information Base (MIB)
Reference Guide ( .\doc\en\mibguide.pdf ) provided on the
APC Battery Management System Utility CD.
An Apply Local Computer Time to System option, which is
available in the Web interface only, sets these values to match
the date and time settings of the computer you are using to
access the Web interface.