User’s guide, Battery management system – APC Battery Management System User Manual
Page 62
®
USER’S GUIDE
Battery Management System
55
HTTP/HTTPS Port Configuration
HTTP Port
Identifies the TCP/IP port used for communications by HTTP with the
Battery Management System. The default is
80
.
You can change the
Port
setting to the number of any unused port
between
5000
and
32768
to enhance the protection provided by
User
Name
and
Password
settings.
You must then use a colon (:) in the command line to specify the non-
default port number. For example, for a port number of 5000 and a
Battery Management System IP address of 171.215.12.114, you would
use this command:
http://171.215.12.114:5000
HTTPS Port
Identifies the TCP/IP port used for communications by HTTPS with the
Battery Management System. The default is
443
.
You can change the
Port
setting to the number of any unused port
between
5000
and
32768
to enhance the protection provided by
User
Name
and
Password
settings.
You must then use a colon (:) in the command line to specify the non-
default port number. For example, for a port number of 6502 and a
Battery Management System IP address of 171.215.12.114, you would
use this command:
https://171.215.12.114:6502
Option
Description