User’s guide, Battery management system – APC Battery Management System User Manual
Page 114
®
USER’S GUIDE
Battery Management System
107
Boot Mode Transition. Tag 2, Len 1, Data 1/2
This option 43 setting enables or disables the
After IP Assignment
option
which, by default, causes the
Boot mode
option to base its setting on the
server that provided the network assignment values (
DHCP Only
or
BOOTP Only
):
• A data value of 1 disables the
After IP Assignment
option. The
Boot
mode
option remains as
DHCP & BOOTP
after network values are
assigned successfully. Whenever the Management Card reboots, it will
request its network assignment first from a BOOTP server, and then, if
necessary, from a DHCP server.
• A data value of 2 enables the
After IP Assignment
option. The
Boot
mode
option switches to
DHCP Only
when the Management Card
accepts the DHCP response. Whenever the Management Card
reboots, it will request its network assignment from a DHCP server,
only.
Following, in hexadecimal format, is an example of a Vendor Specific
Information option that contains the APC cookie and the disable Boot Mode
Transition setting:
Option 43 = 0x01 0x04 0x31 0x41 0x50 0x43 0x02 0x01 0x01
See
.
For more information about the
After IP Assignment
option,
see
.