User’s guide, Battery management system – APC Battery Management System User Manual

Page 171

USER’S GUIDE

Battery Management System

164

3. Type open and the Battery Management System’s IP address, and

press

NTER

. If the

Port

setting for

FTP Server

in the

Network

has changed from its default value of

, you must use the non-default

value in the FTP command.
a. For some FTP clients, use a colon to add the port number to the end

of the IP address.

b. For Windows FTP clients, separate the port number from the IP

address by a space. For example, if the Battery Management
System Management Card’s

FTP Server Port

setting has been

changed from its default of

, such as to

21000

, you would use the

following command for a Windows FTP client transferring a file to a
Battery Management System Management Card with an IP address
of 150.250.6.10.
ftp>

open 150.250.6.10 21000

4. Log on using the Administrator user name and password. (

apc

is the

default for both.)

5. Upgrade the AOS. For example:

ftp>

bin

ftp>

put apc_hw02_aos_264.bin

6. When FTP confirms the transfer, type

quit

to close the session.

7. Repeat

step 2

through

step 6

for the application module. In

step 5

, use

the application module file instead of the AOS module.