APC Battery Management System - Manual (Page 180)

®
USER’S GUIDE
Battery Management System
173
SNMP issues (Battery Management System
Management Card)
Problem Solution
Unable to perform a GET 1. Verify the read (GET) community name.
2. Use the Control Console or Web interface to ensure
that the NMS has access. See Telnet/SSH .
Unable to perform a SET 1. Verify the read/write (SET) community name.
2. Use the control console or Web interface to ensure
that the NMS has write (SET) access. See Telnet/
SSH .
Unable to receive traps at
the NMS Query the MIB mconfigTrapReceiverTable OIDs to
verify that the NMS IP address is listed correctly, and
that the community name defined for the NMS matches
the community name in the table. If necessary, use SETs
to the OIDs, or use the control console or Web interface
to correct the trap receiver definition problem. See
Telnet/SSH .
Traps received at an NMS
are not identified See your NMS documentation to verify that the traps are
properly integrated in the alarm/trap database.