Nexo LS18 User Manual
Geo s12 series, User manual
This manual is related to the following products:
Table of contents
Document Outline
- PLEASE READ CAREFULLY BEFORE PROCEEDING
- CONTENTS
- 1 Introduction
- 2 GEO S12 General Set-up Instructions
- 3 Amplifier Selection for use with GEO S12 & LS18
- 4 GEO S12 Setups on NEXO TD Controllers
- 5 Connection diagrams
- 5.1 GEO S12 / NXAMP4x1 (Bridge Stereo – S12 in Passive mode)
- 5.2 GEO S12 / NXAMP4x1 (Bridge Stereo – S12 in Active mode)
- 5.3 LS18 / NXAMP4x1 (Bridge Stereo)
- 5.4 LS18 & Geo S12 / NXAMP4x1 (Bridge Stereo – S12 in Passive mode)
- 5.5 GEO S12 / NXAMP4x4 (4 Channels – S12 in Passive mode)
- 5.6 GEO S12 / NXAMP4x4 (S12 in Stereo Active mode)
- 5.7 LS18 / NXAMP4x4 (4 channels)
- 5.8 LS18 & GEO S12 NXAMP4x4 (S12 in Passive Mode)
- 6 NS-1 Simulation software
- 7 Configurable Directivity Device
- 8 GEO S12 hardware setup procedure
- 8.1 SAFETY FIRST
- 8.2 General Description
- 8.3 GEO S12 in fixed installations
- 8.3.1 Fixed installation Accessories and kits
- 8.3.2 Single GEO S12 rigidly mounted on a wall or a ceiling (vertical or horizontal)
- 8.3.3 Single GEO S12 cable mounted on a wall or a ceiling (vertical or horizontal)
- 8.3.4 GEO S12 vertical array rigidly mounted on a ceiling
- 8.3.5 LS18 & GEO S12 vertical array rigidly mounted on a ceiling
- 8.3.6 LS18 and GEO S12 vertical array cable mounted on a ceiling
- 8.3.7 GEO S12 horizontal array rigidly mounted on a ceiling
- 8.3.8 GEO S12 horizontal array cable mounted on a ceiling
- 8.4 GEO S12 in touring applications
- 8.4.1 Touring Accessories
- 8.4.2 Single GEO S12 on speaker stand or on LS18 horizontally
- 8.4.3 Single GEO S12 flown vertically
- 8.4.4 Single GEO S12 flown horizontally
- 8.4.5 Two GEO S12 on wind-up stand
- 8.4.6 Two GEO S12 flown horizontally
- 8.4.7 Two or more GEO S12 flown vertically
- 8.4.8 LS18 and three or more GEO S12 flown horizontally
- 8.4.9 Ground stacked LS18 and GEO S1210
- 8.5 Testing and Maintenance of the system
- 9 System alignment guidelines
- 10 GEO S12 – LS18s System Check List
- 11 Technical Specifications
- 11.1 LS18 Subwoofer
- 11.2 GEO S1230 Module
- 11.3 GEO S1210 Module
- 11.4 GEO S12 Touring Applications Accessories
- 11.4.1 GPT- BUMPER
- 11.4.2 LS18 Rigging Plates
- 11.4.3 GEO S12 Rigging Plates
- 11.4.4 Tension Mode Link Bars for GPT-XBOW
- 11.4.5 Lifting Ring
- 11.4.6 Truss hook for GPT-PSBRK or GPT-SSBRK
- 11.4.7 Truss hook for single vertical GEO S12
- 11.4.8 “U” Bracket for single vertical GEO S12
- 11.4.9 U” Bracket for two vertical GEO S12
- 11.4.10 Ground Stacking Device for up to 6 GEO S1210
- 11.5 GEO S12 Fixed Installations Accessories
- 11.5.1 LS18 & GEO S12 Bumper (VNI-BUMPER)
- 11.5.2 LS18 Counter Plate (LSI-CPLA)
- 11.5.3 GEO S12 Counter Plate (VNI-CPLA)
- 11.5.4 LS18 & GEO S12 Connecting Plate 1 (VNI-ANPL1)
- 11.5.5 GEO S12 Connecting Plate 2 (VNI-ANPL2)
- 11.5.6 GEO S12 Connecting Plate 3 (VNI-ANPL3)
- 11.5.7 Single GEO S12 “U” Bracket
- 11.5.8 “L” Bracket for cable suspension
- 11.5.9 “U” Bracket for rigid suspension
- 11.5.10 GEO S12 Push-Pins (04VXT-BL820)
- 12 GEO S12 Series Parts & Accessories List
- 13 USER NOTES