Required items – Nexo LS18 User Manual
Page 58
Page 58/103
GEO
S12
HARDWARE SETUP PROCEDURE
8.4.8 LS18 and three or more GEO S12 flown horizontally
Required items
1 x Bumper (GPT-BUMPER);
M pairs of LS rigging plates (LST-XBOW) for M x LS18 cabinets;
N Pair of Rigging Plates (GPT-XBOW) for Geo S12 cabinets;
4x(N+M) Quick release pins for (N+M) cabinets;
1 hoist (not provided).
IMPORTANT
Maximum GEO S12 quantity for flown vertical cluster is 12 (and eventually less).
Maximum LS18 quantity for flown vertical cluster is 6 (and eventually less)
Please check NS1 for mechanical Safety Working Load computations.
IMPORTANT
Motor hoist must be rated to support entire cluster weight. Please check configuration
in NS1 for proper motor hoist rating
GEO S12 XBOW ANGLE SETTINGS PLATE
LS18 XBOW ANGLE SETTINGS PLATE