Nexo LS18 - Manual (Page 33)

GEO S12 HARDWARE SETUP PROCEDURE Page 33/103
8.3 GEO S12 in fixed installations
8.3.1 Fixed installation Accessories and kits
Accessories are:
 Bumper for Geo S12 & LS18 (VNI-BUMPER1)
 “U” Bracket (VNI-UBRK12)
 “L” Bracket for cable suspension (VNI-LBRK)
 “U” Bracket for rigid suspension (VNI-ABRK)
 Connecting Plates / range : 0.20° - 3.15° (VNI-ANPL1)
 Connecting Plates / range : 5.00° - 10.0° (VNI-ANPL2)
 Connecting Plates / range : 16.0° - 30.0° (VNI-ANPL3)
 Counter-Plates for LS18 (LSI-CPLA)
 Counter Plates for Geo S12 (VNI-CPLA)
Please refer to section 13.4 of this manual for more information of above references.
IMPORTANT
In order to prevent screws from getting loose in fixed installations, use blocking liquid
LOCTITE
TM
243 or equivalent for all screws used with GEO S12 & LS18 fixed installation
accessories.
LOCTITE TM 243 is available at NEXO or at your local distributor upon request.
VNI-BUMPER VNI-UBRK12 VNI-LBRK VNI-ABRK
VNI-ANPL1 VNI-ANPL2 VNI-ANPL3