Nexo LS18 - Manual (Page 37)

GEO S12 HARDWARE SETUP PROCEDURE Page 37/103






 (9) Apply Loctite 243 or equivalent to four shoulder screws from the last VNI-CPLA kit;
 (10) Position the VNI-BUMPER bumper to required angle position and use the four
shoulder screws to connect it the bumper to the top cabinet;
 (11) Flip GEO S12 cluster by 90° so that it is ready to be positioned under the ceiling;
 (12) Four screws 12mm diameter (not provided) are required to secure the bumper
under the ceiling.