Nexo LS18 - Manual (Page 15)

GEO S12 S ETUPS ON NEXO TD C ONTROLLERS Page 15/103
4 GEO S12 S
ETUPS ON
NEXO TD C
ONTROLLERS
4.1 NXAMP TDControllers
As of today, load 3.15 features the setups listed in below table in the “Nexo configurations” menu.
Keep in mind that the “custom configuration menu” allows to build any combination of NEXO speakers
with
- full phase compatibility from 20 Hz to 20kHz.
- Choice between 85 Hz and 120 Hz X-over point between LS18 and Geo S12.
Please consult www.nexo-sa.com for upgrade releases.
Setup Name # CH1 CH2 CH3 CH4
S1210 AC WB
LF(1-3) HF(2-4)
50 S1210 LF 50-1k S1210 HF 1k-20k S1210 LF 50-1k S1210 HF 1k-20k
S1210 PA WB
4 Channels
53 S1210 PA 50-20k S1210 PA 50-20k S1210 PA 50-20k S1210 PA 50-20k
S1210 PA XO (2-4)
LS18 (1-3)
55 LS18 35-85 S1210 PA 85-20k LS18 35-85 S1210 PA 85-20k
S1230 AC WB
LF(1-3) HF(2-4)
56 S1230 LF 50-1k S1230 HF 1k-20k S1230 LF 50-1k S1230 HF 1k-20k
S1230 PA WB
4 Channels
59 S1230 PA 50-20k S1230 PA 50-20k S1230 PA 50-20k S1230 PA 50-20k
S1230 PA XO (2-4)
LS18 (1-3)
60 LS18 35-85 S1230 PA 85-20k LS18 35-85 S1230 PA 85-20k