11 technical specifications, 1 ls18 subwoofer, 1 system specifications – Nexo LS18 User Manual
Page 73: 11 t
T
ECHNICAL
S
PECIFICATIONS
Page 73/103
11 T
ECHNICAL
S
PECIFICATIONS
11.1 LS18 Subwoofer
11.1.1 System specifications
SYSTEM SPECIFICATIONS
LS18 with NXAMP TD Controller
Frequency Response [a]
35 Hz - 120 Hz ±3dB
Usable Range @-6dB [a]
32Hz - 130 Hz
Sensitivity 1W @ 1m [b]
107 dB SPL Nominal
Nominal Peak SPL @ 1m [b]
137 to 140 dB Peak
Nominal Impedance
8
Crossover Frequencies
60 Hz
– 85 Hz - 120 Hz Active
Amplified Controller
NXAMP4x1: 2 x LS18 in parallel on 2 bridged channels
NXAMP4x4: 2 x LS18 on 1 channel
SYSTEM OPERATION
Electronic Controller
The NEXO NXAMP presets are precisely matched to the LS series cabinets and include sophisticated
protection algorithms. Using LS Series cabinets without a properly connected NXAMP will result in poor
quality and can damage components
Speaker Cables
LS18 is wired 1- & 1+ on 2 In/Out Speakon connectors
Single cables can thus be used to loop through to PS15-R2 or to Geo S12.
PRODUCT FEATURES
LS18 (LS18e)
Components:
1 x 18’’ (46cm) 4’’ voice coil long excursion 8
driver
Height x Width x Depth
510 x 675 x 775 mm (20.1” x 26.1” x 30.5”)
Weight : Net
55.5 kg excluding accessories (122.3 lb)
Connectors
2 x NL4MP Speakon 4 pole
Construction
Baltic Birch Ply & structured black coating
Fittings:
Handles
4 metal recessed pockets (None)
Front finish
Molded Dark Grey Metal Grill
Flying Points
Two side plates connecting with external accessories (None)
Stand fittings
Internal Steel Stand Fitting on Top (35mm, 1"3/8) allows pole mounting for PS15 or Geo S12 (None)
As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.
[a] Response curves & data : Half-Space Anechoïc radiation for the LS18 + NXAMP.
[b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise., Wideband to the
specified ±3dB range. Data are for speaker + processor + recommended amplifier combinations. Peak SPL is at clipping of recommended amplifier.
[c] Directivity curves & data : obtained by computer treatment on off axis response curves.