Yokogawa µR20000 - Manual (Page 59)

59
IM 04P02B01-02E
Recommended Replacement Periods for Worn Parts
To preserve the reliability of the recorder and to use the recorder in good condition for
an extended time, it is recommended that periodic replacements be made on parts. The
replacement parts may change to accommodate preventive maintenance over extended
time. Be sure to check with your nearest YOKOGAWA dealer.
The table below shows the recommended replacement period for expendable parts. The
replacement period shown here applies when the recorder is used under standard operating
conditions. For the actual replacement period, consider the actual conditions of use.
Replacement of parts other than the chart paper, pen, ribbon cassette, and internal light
LED will be carried out by a YOKOGAWA engineer or an engineer certified by YOKOGAWA.
Contact your nearest YOKOGAWA dealer when such replacement is necessary.
Note
The replacement period of the display and the internal light LED is the half life of the brightness.
The deterioration of brightness varies depending on the condition of use, and its determination
is subjective. Consider these facts for determining the actual replacement period.
Pen Model
Item
Replacement
Period
Part Name Part No. Note
Quantity
Used
Z-fold chart paper 41 days
33 days
CHART B9573AN When used at 20 mm/h
When used at 25 mm/h
1
Felt pen 2 km PEN ASSY
B9902AM
B9902AN
B9902AP
B9902AQ
Red
Green
Blue
Violet
At a pen speed of
10 cm/s
1 each
Plotter pen
100,000
characters
PEN ASSY B9902AR When printing continuously 1
Display 5 years* DISPLAY ASSY B8802CA 1
Chart paper feed
motor
5 years MOTOR ASSY B9905GS 1
Plotter carriage 5 years CARRIAGE ASSY B9905NB 1
Plotter motor 5 years MOTOR ASSY B9905NS For the X-axis 1
Lever 5 years Lever ASSY B9900RH For the plotter 1
Pen servo 5 years SERVO ASSY B8802KE Shared by all pens (excludes
the pen arm ASSY)
1 to 4
Internal light LED 2 years* LED ASSY B8800CR 2
* The half life of the brightness at the factory default brightness setting.
Dot Model
Item
Replacement
Period
Part Name Part No. Note
Quantity
Used
Z-fold chart paper
41 days
33 days
CHART B9573AN
When used at 20 mm/h
When used at 25 mm/h
1
Ribbon cassette 3 months RIBBON CASSETTE B9906JA 1
Display 5 years* DISPLAY ASSY B8802CA 1
Chart paper feed
motor
5 years MOTOR ASSY B9905GS 1
Pulley 3 years PULLY B9901EY For the carriage 2
Carriage motor 5 years MOTOR ASSY B9906FX 1
Carriage 5 years CARRIAGE ASSY B8803BB 1
Ribbon shift motor 5 years MOTOR ASSY B9906FS 1
Ribbon shift gear 5 years
RIBBON SWING
GEAR ASSY
B8803BS 1
Ribbon feed motor 5 years MOTOR ASSY B9906GL 1
Ribbon feed gear 5 years GEAR
B9906GN
B9901HM
B9901HN
1 each
Internal light LED 2 years* LED ASSY B8800CR 2
* The half life of the brightness at the factory default brightness setting.