Yokogawa µR20000 - Manual (Page 34)

34
IM 04P02B01-02E
Checking or Setting the Date/Time
Checking the Date/Time
The date/time is shown on the display when the DISP key is pressed several times.
Setting the Date/Time
1. Hold down the
MENU
key for 3 seconds to enter Setting mode.
2. Press the key to show Clock and then press the key.
Set=Clock
3. Set the date and time and press the key.
04/01/17 10:39:47 Year/Month/Day Hour:Minute:Second
Press the key to select the desired digit. Press the key to select the
value.
Example: Changing from January to May in the figure below
Press the
key three times to move the cursor to the month position. Next,
press the key four times to change the value from 1 to 5.
04/01/17 10:39:47 04/05/17 10:39:47
After change Before change
4. When the Setting complete screen appears, press the ESC/? key.
Clock
Setting complete
5. Hold down the MENU key for 3 seconds to return to Operation mode.
Explanation
The date format can be changed by date format type of basic setting mode.
Preparing to Record
* When the key or key is pressed while holding down the SHIFT key, the operation is reversed as
when the respective key is pressed by itself.