Yokogawa µR20000 - Manual (Page 28)

28
IM 04P02B01-02E
Preparing to Record
Loading or Replacing the Chart Paper
CAUTION
• Do not install or remove the chart cassette with the chart paper guide open. This
may damage the stopper.
• Continuing to record or print without the chart paper on the dot model can cause
damage to the chart cassette platen (the cylindrical section that holds the paper
during the recording operation). Be sure to replace the chart paper ahead of
time.
• When attaching the chart cassette, push it in until you hear the stopper click into
place. Recordings will be inaccurate if the chart cassette is not fixed in place
with the stopper.
Loading the Chart Paper
1. Open the door.
If recording is in progress, press the RCD key to stop the recording.
Open
2. Remove the chart cassette.
Gently press the center stopper inward. The bottom section of the chart cassette
comes out. Gently lift the chart cassette and pull it out from the recorder case.
Stopper