Recording/displaying data, Starting the recording, Stopping the recording – Yokogawa µR20000 User Manual

Page 43: Feeding the chart paper

IM 04P02B01-02E

Recording/Displaying Data

Starting the Recording

Press the

RCD

key to start recording.

The status display shows the word “RECORD.”

Note

For models with the FAIL/chart end detection and output function (/F1 option), the chart feed
will not start even when pressing the RCD key if the chart paper is empty or almost out. Insert
new chart paper before pressing the RCD key.

Recording Example (Pen Model)

Recording Example (Dot Model)

The recording examples may appear differently from the actual recording as a result of
functional improvements made on the recorder after this manual was written.

Stopping the Recording

While recording is in progress, press the

RCD

key to stop recording.

The word “RECORD” on the status display clears.

Feeding the Chart Paper

The chart paper is fed while the

FEED

key is held down.