Yokogawa Button Operated MV2000 - Manual (Page 36)

Removing the CF Card
1. Press FUNC once.
2. Press Media eject once.
Displays the CF card icon
3. Press the CF soft key once. The message “Media can be removed safely”
appears. The CF card icon is blue.
4. Open the cover.
5. Press the CF card eject button. When you eject the CF card, the storage media
icon disappears.
Eject button
Push on the eject button until it clicks.
The eject button remains depressed.
Pinch the left and right sides of the CF
card and remove it.
6. Close the cover.
Operation complete.
Note
If you remove the CF card without carrying out the media eject procedure, the message “Media
was removed compulsorily” appears. Remove the CF card by carrying out the procedure above
to prevent damaging the data that is stored.
Viewing Data with DAQSTANDARD
You can use the DAQSTANDARD software that comes with the MV1000 to view data
saved to a CF card. For more information, see the DAQSTANDARD User’s Manual (IM
04L41B01-01E)
Measurement
36
IM MV1000-02E