Yokogawa Button Operated MV2000 - Manual (Page 29)

Connecting the AC Adapter (if the power supply voltage suffix code is -3)
Before Connecting the Power Supply
To prevent the possibility of electric shock and damaging the instrument, follow the
warnings below. Make sure to comply with the warnings below.
WARNING
• Use only power cords supplied by YOKOGAWA for the instrument.
• Ensure that the supply voltage matches the rated supply voltage of the AC
adapter before connecting the power cable.
• Check that the power switch is turned OFF before connecting the power cord.
• If you are not going to use the instrument for an extended time, unplug the
power cord of the AC adapter from the outlet.
• Use only the AC adapter (B8070TN) made by YOKOGAWA.
• Be sure nothing is placed on top of the AC adapter or power cord or let heat
generating objects come in contact with them.
• When unplugging the power cord from the outlet, never pull the cord itself.
Always hold and pull by the plug. If the power cord is damaged, contact your
dealer for replacement.
Use a power supply that meets the following conditions:
Item Specifications
Rated supply voltage 100 to 240 VAC
Operating supply voltage range 90 to 264 VAC
Rated supply frequency 50/60 Hz
Power supply frequency range 48 to 62 Hz
Maximum power consumption 115 VA (100 V), 125 VA (240 V)
Connection Procedure
1. Check that the power to the MV1000 is OFF.
2. Connect the AC adapter to the AC adapter jack of the MV1000.
3. Connect the power cord plug that came with the AC adapter to the power
connector of the AC adapter.
4. Connect the plug on the other end of the power cord to the outlet that meets the
above conditions.
Connecting a Power Cable
29
IM MV1000-02E